September 26th, 2022

Mobile Cranes vs. Fixed Cranes: What Are the Differences?

The different types of cranes include all-terrain cranes that can handle any kind of lifting on any type of ground, self-erecting cranes that can increase in height as your project grows and floating cranes that can work even on water....
general hoisting crane service September 20th, 2022

5 Crane Safety Tips to Prevent Accidents

Crane use can be crucial to various construction tasks, but it can also be risky if proper precautions are not taken. Accidents involving cranes and other types of heavy machinery can cause serious injuries. There are several steps that you...
70 ton crane rental services in ca September 20th, 2022

Why Use Rental Crane for Tree Removal on Construction Sites?

In open construction areas, it might be feasible to fall a tree after cutting. However, in most cases, using a crane is the best way to lift and move the trees. Many construction sites have trees that need to be...
general hoisting crane services in ca and utah September 6th, 2022

How to Prepare Your Construction Site for Crane Rental in Orange County

If you are working on a construction project and have booked a crane rental service in Orange County or any other location, you must know that you cannot leave your site as it is. Crane is large and heavy equipment...
A spreader bar is a tool used in crane-assisted lifting, which operates by lowering the load below the hook. This is used specifically when lifting enormous increments that require something to divide the burdens to avoid mishaps. Spreader bars are generally made of pipe and have lifting points at the top and bottom on opposing ends. They are suspended from two slings by a crane and often have two to four bottom slings attached for rigging to the load. Spreader bars, for example, are always in compression and are constructed with various pipe diameters and thicknesses to achieve the necessary design factor to satisfy the maximum rated capacity. Spreader bars are the optimum solution for loads with several lift points and a need for load control. Spreader Bars vs. Lifting Beams for Overhead Cranes Spreader beams are among the most often used below-the-hook lifting devices in the material handling sector. Spreader beams, like lifting beams, are used to increase the number of potential lifting points on rigged loads and keep lifting slings at a 90° angle relative to the horizon. Spreader bars convert vertical lifting forces into compression forces on the beam, as opposed to lifting beams, which convert vertical lifting forces into bending forces on the beam. Lifting and rigging spreader bars are made up of a beam with two or more lifting lugs on the bottom that attach to lifting slings that attach to the weight. The top attachment is what distinguishes them from lifting beams. Spreader bars are carried by a multi-leg sling that attaches to the bails on top of the spreader beam rather than a single-centered bail that links to a crane or hoist hook. Why You Should Choose Spreader Bars for Overhead Cranes? If you are unsure about which Spreader bars to use on overhead cranes, consider the following advantages to help you decide: ● Spreader beams are particularly effective in lifting extra-wide and heavy-duty loads. ● Spreader beams transform lifting forces into pure compression forces, allowing them to be less stiff than lifting beams. This means they use less material and are often smaller, lighter in weight, and less expensive than lifting beams. ● The use of two lifting points on top of spreader beams evenly distributes the load's weight and eliminates the issues associated with putting stress on a single lifting attachment. This one-of-a-kind design decreases the likelihood of the load toppling, sliding, or bending, as well as the risk of crushing or harming the load. ● A spreader bar is often used when the weight is too heavy for numerous slings to raise and something needs to be placed underneath to keep it steady. ● You do not have to pay for maintenance when you rent spreader bars. It is the company's job to keep the equipment in good operating order. You will receive spreader bars in perfect operating condition. You also don't have to bother about pre- and post-use storage. ● Before renting a spreader bar or any other piece of equipment, it must pass a set of stringent safety examinations. Qualified personnel perform safety checks to guarantee proper rigging. If you need spreader bars for overhead cranes for your next project, contact Rebco Crane and Rigging Services for high-quality spreader bars rental tailored to your specifications. August 30th, 2022

Why Do You Need Commercial Crane Rental Services?

Cranes are complex machines that play an essential part in the construction business around the world. They have a high weight-bearing limit and can do most of the challenging work on the building site. The construction business is monetarily depleting...
commercial crane rental utah August 23rd, 2022

Know and Understand the Cost of Commercial Crane Rental Service

Commercial crane rental service helps in the easy completion of the project. A project that takes months to complete if done manually completes in a few days with the help of the crane. But, sometimes, the cost of the service...

We look forward to the opportunity to provide first class crane service

Copyright © 2021 Rebco. All Rights Reserved.